CY60T is a 5-axis full-function CNC sprial bevel testing machine for comprehensive propertiey testing of spiral bevel gears with 90°shaft angle.Roll checks for gears reflects the transmission stability、noise、tooth contact、surface roughness、radial run-out and pith error of gear sets.
Machine Features:
1、Horizontal structure,gear and pinion spinldes adopt high-rigid motorized spinlde directly driven by big torque motor, X、Z linear axes adopt direct drive servo motor, Y linear axis adopts direct drive servo motor and precise reducer.The machine has compact structure、high-rigid、stable performance、steady transmission and quick-response;
2、Quick-responsiveness、high-efficiency and low failure rate;
3、Independent HTS Testing Control software,and makes setup and operation easy and intuitive.
Functional Configurations:
1、Full-automatic test for spiral bevel and hypoid gears with 90°shaft ange;
2、Equipped with Beckhoff TwinCAT CNC system;
3、Motor torque loaded, and loaded torque set-up;
4、Independent measuring system with high-precison and high-responsiveness;
5、Automatic run-out determination for both members;
6、Automatic nick and burr detection;
7、Multiple postions detection ;
8、Automatic backlash setting at multiple testing positons;
9、SFT testing;
10、SBN testing.
Specification | Value | |
Gear set | Max. Module(mm) | Unlimit |
Range of tooth numbers | Unlimit | |
Max.gear pitch diameter(mm) | Φ600 | |
Pinion spindle nose bore | Outside diameter(mm) | Φ128.1906 |
Taper | (1:18.2857) | |
Bore diameter(mm) | Φ120 | |
Bore depth(mm) | 390 | |
Gear spindle nose bore | Outside diameter(mm) | Φ99.2187 |
Taper | (1:19.6923) | |
Bore diameter(mm) | Φ100 | |
Bore depth(mm) | 400 | |
Machine Dimension ( including guards) | L(mm) | 2900 |
W(mm) | 2500 | |
H(mm) | 2100 | |
Gross Power(Kw) | 60 | |
Net Weight(Kg) | 8 | |
